From 999472b6d6ce0dbcf4a85ece8e53facf598e935e Mon Sep 17 00:00:00 2001 From: Matt Date: Mon, 15 Dec 2025 00:47:22 +0000 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 167fb27..0958541 100644 --- a/README.md +++ b/README.md @@ -82,7 +82,7 @@ The displayed signal is sampled from ADC0. The test signal is output on D1. The The 3D design is a two part case with space for a AA-battery (Li-poly 3.7v, which can connect directly to a Seeed XIAO ESP device) clips and holes for the USB-C connector and "ground", "signal" and "test" connections using standard 2.54mm pitch, easily cut from jumpers and soldered directly to the Seeed XIAO. The 3D design was done using Fusion 360 and printed on a Bambu Labs A1 Mini in 30 minutes. -I recommend putting the "Signal" connection in the middle, and never connecting the outer-most pins (ground and test) to avoid shorting the signal to ground and (probably) frying the esp32. The middle (signal) pin can be connected to either of its neigbours and you'll see either the ground or the test signal. +I recommend putting the "Signal" connection in the middle, and never connecting the outer-most pins (ground and test) to avoid shorting the test signal to ground and (probably) frying the esp32. The middle (signal) pin can be connected to either of its neigbours and you'll see either the ground or the test signal. ![esp-scope](esp-scope-3d.jpg)