en/ESP-Scope
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
Matt
2025-12-15 00:47:22 +00:00
committed by GitHub
parent 5a7f7b716a
commit 999472b6d6
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@@ -82,7 +82,7 @@ The displayed signal is sampled from ADC0. The test signal is output on D1. The
The 3D design is a two part case with space for a AA-battery (Li-poly 3.7v, which can connect directly to a Seeed XIAO ESP device) clips and holes for the USB-C connector and "ground", "signal" and "test" connections using standard 2.54mm pitch, easily cut from jumpers and soldered directly to the Seeed XIAO. The 3D design was done using Fusion 360 and printed on a Bambu Labs A1 Mini in 30 minutes.
I recommend putting the "Signal" connection in the middle, and never connecting the outer-most pins (ground and test) to avoid shorting the signal to ground and (probably) frying the esp32. The middle (signal) pin can be connected to either of its neigbours and you'll see either the ground or the test signal.
I recommend putting the "Signal" connection in the middle, and never connecting the outer-most pins (ground and test) to avoid shorting the test signal to ground and (probably) frying the esp32. The middle (signal) pin can be connected to either of its neigbours and you'll see either the ground or the test signal.
![esp-scope](esp-scope-3d.jpg)